Types Of Garage Door Springs

Types Of Garage Door Springs

We all know about garage door springs yet homeowners frequently ignore them. Are you aware that they are among the most crucial parts of your garage door and garage door opener? You can simply raise and lower your garage door thanks to the springs on it. There are different types of garage door springs.

Maintaining your garage doors should be done carefully. DIY can be dangerous if you do not know the basics. Professionals are required to perfectly maintain all kinds of garage doors, Here are some types of garage door springs you can check for the future.

Different Types Of Garage Door Springs 

Extension Springs

Normally extension springs are found in the upper, horizontal track on each side of the garage. It stores energy by stretching or expanding. As the garage door closes, more weight pans out the horizontal track, stretching the extension springs even farther.

Two extension springs are used in a garage door, one on each side, and they both move parallel to the horizontal track. Each of these springs provides a different level of strain.

Open-looped ends

Since it doesn’t need for unlocking the eyebolt or taking the pulley apart, this kind of extension spring is the simplest to replace. But even if only a portion of the spring is destroyed, you still have to replace the complete thing.

Double-looped ends 

Two coils that connect to the pulley and eyebolt are located at the end of this sort of spring. Double-looped ends extension springs might be more difficult to replace despite being stronger.

Clipped ends

The strongest kind of extension springs for garage doors are those with clipped ends. These extension springs are the best and industry standard for garage doors weighing 200 pounds or more. The drawback is that they are the most difficult to modify.

Torsion Springs

Tension springs are attached to the metal shaft right above the garage door opening. Aluminum drums are placed on each end of the shaft after installation. Depending on the size, durability, and weight of your garage door, one to four torsion springs will need to be fitted. Torsion springs have 4 different types.

Standard Torsion Spring

Typically, ordinary torsion springs are positioned above the garage opening on residential garage doors. One typical torsion spring should be used if your garage door is light; otherwise, two should be utilized.

Early Set Torsion Spring

These torsion springs are positioned in the center of the torsion shaft. On either end of the shaft, several kinds of hardware are mounted next to the cable drums.

Steel Rolling Door Torsion Spring

These torsion springs are installed within the torsion barrel supporting the rolling door, which is often used in commercial structures.

Torque Master Torsion Spring

Among all forms of torsion springs, this one is regarded as the safest. They are held in place by a winding cone placed at the end of each torsion rod and are encased within the torsion shaft.

How To Prevent Any Damage To Your Garage Door Springs

There can be several safety precautions for your garage door. As homeowners do not have much idea about it, here are some amazing tips to prevent any damage to your garage door springs.

  • Replace Old Springs
  • Check Cable
  • Invest In High-End Products
  • Inspect Regularly
  • Lubricate Springs
  • Scheduled Maintenance

These tips can help you maintain your garage door if you can. If not, you can also call professionals. They are well trained and can easily help you out with this stuff. They are available 24/7 for any kind of inconvenience. You can call them for a free quote,

Skip to content